1) Unscrew and remove the top chamber.
2) Unscrew and remove the mounting screw.
3)Remove the used ARC coil by lifting over the metal pin.
4)Place a new coil over the metal pin, make sure the coil edge is well seated and lined up with the tank.
5) Screw the mounting screw back onto the base hardware.
6) Replace the top chamber.
1) Lightly push in the bottle securing cap at the bottom of the mod.
2) Then twist counter-clockwise direction to remove the securing cap.
3) Insert a new silicone e-juice bottle into the plastic carrier frame, reinsert the frame into the mod then push the knob and twist clockwise direction to secure.
1) Invert the Feedlink mod and unscrew the battery cap.
2) Insert an 18650 battery into the battery compartment with positive end pointing down and negative end pointing up.
3) Screw the battery cap back onto the mod.
Note:
1)Please use single 18650 high rate discharge battery(above 35A)
2)Please don’t over tight the battery cap
Sign up for special offers and updatesfrom aspire now!
UNLOCK OFFERBy signing up, you agree to receive email marketing. Offer is only available for first-time subscribers who have not placed an order with us before.
